CAB THARO Apollo 1 Series, Руководство оператора

Страница: 20 / 139

20 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
Label/ Tag Media Specifications
Label and tag media to be used for the Apollo can be found in the table below.
Note this information before ordering your labels.
Fig. 1 Label formats
Item MINIMUM MAXIMUM
A Label width .5 (12) 4.6 (116)
B Width of silicon liner .5 (12) 4.6 (116)
C Label length .2 (5) 21.5 (546)*
D Gap between labels .08 (2) 21.5 (546)*
E Label thickness .0024 (.06) .01 (.25)
F Thickness of silicon liner .0024 (.06) .01 (.25)
G Distance of the first printing position
from the edge of the silicon liner
.08 (2)
H Distance of the label sensor
from the edge of the silicon liner
.12 (3) 1.9 (48)
For special materials
I Width of punch hole .2 (5) -
K Height of punch hole .08 (2) .2 (5)
L Width of reflective mark .2 (5) -
M Height of reflective mark .08 (2) .2 (5)
* for Apollo 3/200M : 36.8 (934), for Apollo 3/300M : 16.4 (417)
Table 1 b Label formats in inches (figures in brackets are in mm)
E
F
D
A
B
K I
L
M
C
G
H