CAB E2, Руководство оператора, Страница: 22 / 55

22 cab Produkttechnik GmbH
Hooking up the Printer and Computer
Note : The power supply barrel connector must be inserted into the power jack on the back
of the printer before connecting thecommunication cables.
This printer comes with both a nine-pin Electronics Industries Association (EIA) RS-
232 serial data interface and a standard Centronics parallel interface. In either case, you
must supply the required interface cable for your application.
Note : This printer complies with FCC „Rules and Regulations“ , Part 15, for Class B
Equipment, using fully shielded six-foot data cables. Use of longer cables or unshielded
cables may increase radiated emissions above the Class B limits.
Serial (RS-232) Interface Requirements
The required cable must have a nine-pin „D“ type male connector on one end, which is
plugged into the mating serial port located on the back of the printer. The other end of this
signal interface cable connects to a serial port at the host computer.
For technical and pinout information, please refer to the Reference Technical Informa-
tion-Interface Specification on this booklet.