10
10
Once the cutter is connected to the printer, the printer will automatically
recognize it on turn on.
The printer can be configured to suit the individual requirements of cut mode
in the „Setup“ menu. When the cutter is installed, the „Cutter“ menu will
appear.
i
Notice!
For detailed instructions for configuration
Configuration Manual
of the printer.
For setting the cutter parameters select
Setup
->
Machine param.
->
Cutter
.
Parameter
Meaning
Default
Cutter
Configuration of the cutter
> Cut
position
Offset of the cut position relative to the printed
image
Cut position with the initial offset value of "0"
causes to cut in the middle of the gap between
two labels.
If the cut position value is positive, the media
will be advanced before it is cut, that means
the distance between the cut edge and the
rear edge of the label increases.
0
i
Notice!
The values of the setup are basic settings for the actual combination
printer/cutter. After changing the cutter or printer a re-adjustment
may be necessary.
Changes required for processing different print jobs should be
implemented additional offsets available in the software.
The offset values from setup and software are added together for
execution.
3
Printer Configuration
