manualshive.com logo in svg

Cab Technology PX Series, Руководство по обслуживанию

Поделиться
Скачать
Cab Technology PX Series Скачать руководство пользователя страница 18

18

18

4 

Replacing Assembly Units

4.8 

Replacing the Power Supply Unit

Danger!

Risk of death via electric shock!

 

Before opening the housing cover, disconnect the device from the mains supply and wait at lease one 
minute until the power supply unit has discharged.

2

1

4

3

5

3

6

6

7

Removing the power supply unit

1.  Unplug the printer from the electrical outlet.

2.  Remove the cover of the printer 

 2.2 Cover dismount / 

mount..

3.  Loosen screw (1) and remove cover plate (2).

4.  Detach connector on the power supply input (4).

5.  Detach connector on the power supply output (5).

6.  Loosen screws (3,6).

7.  Remove power supply (7).

Installing the power supply unit

1.  Fix power supply (7) with the screws (3,6).

2.  Connect cable to the PCB CPU with  

power supply output (5)

3.  Connect input cable with power supply input (4)

4. 

Mount cover plate (2) and fix it with screw (1).

5.  Mount cover.

Fig. 19 

Replacing the power supply unit

Содержание PX Series







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды