18
window will take the real-time preview image as the current signal source
5. Customize the channel ID of Encoder device (click the blank in the list to unselect it
with the left mouse button)
6. The Decoder list corresponds to the Encoder device channel set to be consistent.
7. Completion of matrix configuration.
Note: The Encoder channel cannot be set to the same, otherwise it will cause conflicts.
In the case of connect to a switch, if the device is reset together and no new channel is
set, it will cause channel conflicts. At this time, the TV may cross-talk, etc. (After reset,
the default channels are 000)
7.2. Multi-View
Multi-View means that multiple groups of signal sources are displayed in one screen.
See the example image below
:
1). Each group of video sources is presented as a sub stream within the Multi-View.
2). Up to 36 groups of signal source segmentation can be supported