WE DIDN’T INVENT CONTROL, WE’RE PERFECTING IT.
8
SERIES 900 SMART
PROGRAMMABLE RELAYS
FUNCTIONS
SETTING THE CLOCK
1. Select the “UTILITIES” option from the main menu and press OK.
2. Select the “SET CLOCK” option from the sub menu and press OK.
3. The cursor will blink on the first digit of the date, press ALT to edit the digit.
4. The digit will now start blinking.
5. Using Up (Z4) and Down (Z2) keys select the appropriate digit.
6. Now press Z3 to edit the other digit and using Up and Down keys select the digit.
7. Now press OK to confirm the changes that have been made.
8. Repeat the same procedure to set the month, year, hour and minutes.
9. Once all the parameters have been set, press OK to save the changes and exit.
PASSWORD
The password secures access to the following main menu options:
”PROGRAM”, ”PARAMETERS”, and ”UTILITIES”.
In RUN mode password protects the run time parameters and ladder viewing.
The password comprises four numeric digits from 0 to 9. Therefore the
password can have any value between 0 and 9999.
SETTING THE PASSWORD
1. Select the “UTILITIES” option from the main menu and press OK.
2. Select the “PASSWORD” option from the sub menu and press OK.
3. The unlock symbol means that the password is not yet set.
4. The cursor will blink on the first digit of the date, press the ALT key to edit
the digit.
5. The digit will now start blinking.
6. Using Up (Z4) and Down (Z2) keys select the appropriate digit.
7. Now press Z3 to edit the other digit and using the Up and Down keys
select the digit.
8. Press OK to confirm the password.
9. Press OK again to enable the password and return to the main menu.
REMOVING THE PASSWORD
1. Select the “UTILITIES” option from the main menu and press OK.
2. Select the “PASSWORD” option from the sub menu and press OK.
3. The lock symbol means that the password is set.
4. The cursor will blink on the first digit, press ALT to edit the digit.
5. The digit will now start blinking.
6. Using Up (Z4) and Down (Z2) keys select the appropriate digit.
7. Now press Z3 to edit the other digit and using Up and Down keys
select the digit.
8. Repeat the same procedure to set all 4 digits.
9. Now press OK to confirm the changes that have been made.
10. Pressing OK again, the password is disabled and the main menu is
displayed.
EXPANSION MODULE SELECTION
1. Select the “UTILITIES” option from the main menu and press OK.
2. Select the “EXT MOD” option from the sub menu and press OK.
3. The cursor will be blinking on ‘A’, press ALT to edit and the ‘A’ will start
blinking.
4. Press Up (Z4) or Down (Z2) keys to select or deselect the expansion module.
5. A dark square around ‘A’ indicates that the module has been selected.
6. Now press OK to confirm the changes that have been made.
7. Repeat the same procedure if the other modules are to be selected.
8. Press OK to save the changes and the ‘UTILITIES’ sub menu is displayed.
PROGRAM PROTECTION
1. If the password is already enabled and user attempts to gain access using
wrong password, then an error message is displayed.
2. If four such consecutive attempts are made then user is presented with
options to either delete the entire device data or else revert.
3. If the DELETE ALL option is selected, then all device data including Password
and program are erased. The user can then reprogram using SPR Soft
software and secure it with a new password.
After four wrong attempts of entering the Password the Screen as shown below
appears. Pressing OK here will delete all device data or press ESC to return to
previous screen (pressing ESC will not delete).
AUTO: In AUTO mode, whenever a key is pressed the backlight will be
switched ON and will switch OFF after 10 seconds.
ON: In ON mode, the backlit will be permanently switched ON.
OFF: In OFF mode, the backlit will be permanently switched OFF.
BACKLIT CONFIGURATION
1. Select the “UTILITIES” option from the main menu and press OK.
2. Select the “BACKLIT CONFIG” option from the sub menu and press OK.
3. The ‘AUTO’ option will be displayed with the cursor blinking on it.
4. Press ALT to edit and the AUTO option will start blinking.
5. Press Up (Z4) or Down (Z2) keys to select other options: ON, OFF.
6. Now press OK to confirm the changes that have been made.
7. Press OK to save the changes and the ‘UTILITIES’ sub menu is displayed.
If only one expansion (extension) module is being used and it has been
assigned as ‘A’ on the expansion module using the selection switch then
make sure that ‘A’ is selected in the ‘EXT MOD’ option in the ‘UTILITIES’
menu. If more than one expansion module is being used then make sure
that the modules have been assigned and selected appropriately because
this in turn will affect the inputs and the outputs.
OK
OK
OK
Z4
ALT
PROGRAM
RUN
PARAMETERS
UTILITIES
PASSWORD
PASSWORD
SET CLOCK
PASSWORD
EXT MOD
BACKLIT CON
PASSWORD
PASSWORD
ENABLED
PASSWORD
PROGRAM
RUN
PARAMETERS
UTILITIES
7
7 2 5 7
7 2 5 7
OK
OK
Z3
Z4
Z4
ALT
PROGRAM
RUN
PARAMETERS
UTILITIES
DD/MM/YY
11/01/11
HH:MM
09:30
SET CLOCK
PASSWORD
EXT MOD
BACKLIT CON
DD/MM/YY
11/01/11
HH:MM
09:30
DD/MM/YY
01/01/11
HH:MM
09:30
DD/MM/YY
15/01/11
HH:MM
09:30
DD/MM/YY
01/01/11
HH:MM
09:30
SAVING DATA
. . . WAIT
OK
OK
OK
Z4
ALT
PROGRAM
RUN
PARAMETERS
UTILITIES
PASSWORD
PASSWORD
SET CLOCK
PASSWORD
EXT MOD
BACKLIT CON
PASSWORD
PASSWORD
ENABLED
PASSWORD
PROGRAM
RUN
PARAMETERS
UTILITIES
7
7 2 5 7
7 2 5 7
OK
ALT
Z4
OK
PROGRAM
RUN
PARAMETERS
UTILITIES
SAVING DATA
. . . WAIT
SET CLOCK
PASSWORD
EXT MOD
BACKLIT CON
EXTENSION
MODULES
A B C
EXTENSION
MODULES
A B C
SET CLOCK
PASSWORD
EXT MOD
BACKLIT CON
EXTENSION
MODULES
A
B C
OK
OK
OK
Z4
OK
ALT
PROGRAM
RUN
PARAMETERS
UTILITIES
BACKLIT
CONFIG
ON
SET CLOCK
PASSWORD
EXT MOD
BACKLIT CON
BACKLIT
CONFIG
ON
BACKLIT
CONFIG
AUTO
SAVING DATA
. . . WAIT
BACKLIT
CONFIG
AUTO
SET CLOCK
PASSWORD
EXT MOD
BACKLIT CON
OK
PASSWORD
INVALID
PASSWORD
. . . try later
OK
OK
PASSWORD
INITIALIZING
DEVICE DATA
. . . WAIT
DELETE ALL?