WE DIDN’T INVENT CONTROL, WE’RE PERFECTING IT.
12
SERIES 900 SMART
PROGRAMMABLE RELAYS
WORKING WITH SPR-SOFT III
TO SET & REMOVE PASSWORD
1. Select the Configuration >Device Utilities menu command. The Device
Utilities window will appear.
2. Click on set password.
3. Enter four digit passwords into the two boxes “New Password” and
“Confirm New Password” then confirm with OK.
4. You can delete your assigned password at any time. To do this, enter the
existing password in the “Old Password” box, then confirm with OK.
5. To change the password, you must first enter the new password in the two
boxes “New Password” and “Confirm Password“ and the existing password
in the Current Password text box. Then confirm with OK.
TO SET BACKLIT MODE
1. Select the Configuration >Device Utilities menu command. The Device
Utilities window will appear.
2. Select the mode Auto, On or Off then click on the set mode button.
3. The requested operation will move the device out from the run mode. The
message “Do you want to continue?” will appear.
4. By pressing Yes, the backlit mode will be set and the message ”Backlit
mode has been set successfully” will appear.
TO CONFIGURE COMMUNICATION PORT
1. Select the Options > Comm port menu command. The COM Port settings
window will appear with two option buttons to select the Port.
2. Select “Device is connected to USB Port” when the device is connected
with a cable.
3. Select “Device is connected to Serial Communication Port” when the
device is connected with a Serial Communication cable.
TO SET COMMUNICATION PARAMETERS
1. Select the Options > Comm port menu command. The COM Port setting
window will appear.
2. The user can set the following communication parameters:
SLAVE ID: Selectable from 1 to 247
BAUD RATE: Selectable as 1200, 2400, 4800, 9600 baud
PARITY: Selectable as NONE, EVEN and ODD
STOP BIT: Selectable as 1 and 2 Stop Bits
CLOCK SETTING
1. Select the Transfer > Device Clock menu command. The Device Clock
window will appear.
2. To view the Date and Time of the device: Click Read button on the clock
setting window.
3. To set the Date and Time in the device: User can select Date and Time to
write into the device. Click Write button on the clock setting window.
DST (DAYLIGHT SAVINGS TIME) SETTING
1. Select the Transfer > Device Clock menu command. The Device Clock
window will appear.
2. To set Enable DST, Select “Click Daylight Saving Time” the DST setting
section will now be visible.
3. User can select the following parameters: Begin Week, Begin Day, Begin
Month, Begin Time, End Week, End Day, End Month, End Time, Offset Time.
4. To set Disable DST:
·
Deselect Daylight Saving Time option and the DST window will be
disabled.
·
Press Set DST.
5. To read DST: Press Read DST, independent of the DST enable or disabled.
TRANSFER OPTIONS
PC to Device
1. Select the Transfer > Program menu command. The transfer window will
appear.
2. Press “PC to Device” button on transfer dialog box. Current program on the
screen will be transferred to the device.
3. Transfer completion message “The Program is downloaded successfully”
will appear on the screen.
Device to PC
1. Select the Transfer > Program menu command. The transfer window will
appear.
2. Press “Device to PC” button on the transfer dialog box. Current program on
the screen will be transferred to the device.
3. Transfer completion message “The Program is downloaded successfully”
will appear on the screen.
4. Read program will be shown on the main screen.
Expansion Module Selection
1. Select the Configuration >PLC Model menu command. The Model
Selection window will appear.
2. Selection of the Series 900 relay model and Expansion modules. Maximum
three expansion modules can be connected to one Series 900 relay.