6
/
20
•
Speed Over Limit: Off
•
GEO Fence: Off
•
Data Transmit Mode: SMS Default when GPRS Parameter is not configured
•
Siren: ON
•
Automatic Immobilizer in Armed status: Disabled
•
Automatic Power supply switch from external to internal when external power low: Enabled
•
External Power low voltage Alert Level: less than 11.5V DC
•
Re-Arm: Disabled
•
Power Saving Mode: Simple Sleep
•
SMS Data Time Zone: GMT+0
•
Crash accident Logger and alert : Off
2.3 Power Supply
2.3.1 External Power and Internal Power
CAT-1X works with two power supply mode: External Power and Internal Battery.
It's working normally with external power supply range from 9-36V DC. When the external power is disconnected
or with low voltage output, device will switch to work on internal battery automatically. And it also will send"
Circuit Cut Off" or "External power low voltage" Alert to preset Alerts Phone Numbers.
2.3.2 Sleep Mode consumptions and how it works
Simple Sleep when Ignition Off:
GSM Sleep with SMS/Call Active, NO GPRS Connection and GPS shut down
All Alarms Detection working normally
Power Consumption in standby without alarm trigger: 10mA
Deep Sleep when Ignition Off:
GSM Shut down, NO SMS/Call active, GPS shut down
Alarms trigger detection: Off 6seconds, detect 2seconds in recycle
Average power consumption without alarm trigger: <5mA
NO sleep when Ignition Off:
GSM all ON with SMS/Call active, and GPRS connected with Server with continuously data sending
GPS ON
All alarm detection work normally
2.4 Transmitter Operation
2.4.1 Transmitter Button functions
Disarm
Arm
Mute
Panic (Siren)
