15
/
20
3.6 Voice Listen-in
Call Center Number D and SMS center Service No. G call Cat-1X, the system will put through to Voice Listen-in
mode directly.
CAT-1X also provide other two methods to start Voice listen-in Operation:
1.
By SMS command with correct password to Cat-1X box to get re-call back
*1234*VMxxxxxxxx#
<xxxxxxx is call back phone No. for system>
2.
Via GPS tracking platform Voice Listen-in Command to start Re-call back for voice listen-in
For how to operate this please check 7-24tracking Platform User’s guide for reference.
3.7 Switch ON/Off Siren
By SMS command, user can switch ON/Off siren remotely.
*1234*SIRENON#
<Switch On SIREN SOUND>
*1234*SIRENOFF#
<Switch Off SIREN SOUND>
3.8 Battery Low Alert
When Cat-1X detected external battery output is with lower than 11.5V DC, system will generate Battery low alerts
to A/B.C Numbers. And stop draw vehicle battery, will switch to user internal battery for work.
After internal battery is going to use out again, system will generate another alert to A/B/C, and system will go to
deep sleep to avoid killing vehicle battery dead. But keep all alarm detection alive for protection.
3.9 Recovery Factory Default
By sending SMS command
*1234*V#
recover device to be factory default setting.
Be careful to use this command, because it will request you to re-configure the device again for working properly.
3.10 Remote Reboot
By sending SMS command *1234*Z# reboot Cat-1X remotely.
This is to solve problem if any operation fail and do quick problem shooting.
3.11 Locate in parking Lot
Cat-1X provides two methods for user to quick locate where the vehicle is by Siren sound and light flashing.
1.
By press Remote controller Siren button to make sound
2.
By send SMS command *1234*L# to get Cat-1X driving siren sound and light flashing.
3.12 GPS Tracking features
3.12.1 Real Time Tracking:
1.
Track by SMS command
