C2R Colibri 5 Series, Руководство пользователя

Страница: 48 / 168

Colibri serie 5 : User’s guide
© 2000-2008 C2R Technologie, Sarl. All rights reserved.
48 48
Rev. C
for the prefix or suffix you wish to enter.
Step 5.
Scan the 2 digit hex value from the Programming Chart inside the back cover of this
manual.
Step 6. Repeat Steps 4 and 5 for every prefix or suffix character
Step 7. To add the Code I.D., scan 5 , C , 8 , 0 .
To add AIM I.D., scan 5 , C , 8 , 1 .
To add a backslash (\), scan 5 , C , 5 , C .
Note: To add a backslash (\) as in Step 7, you must scan 5C twice – once to create the leading
backslash and then to create the backslash itself.
Step 8. Scan Save to exit and save, or scan Discard to exit without saving.
Repeat Steps 1-6 to add a prefix or suffix for another symbology.
Example: Add a Suffix to a specific symbology
To send a CR (carriage return)Suffix for UPC only:
Step 1 . Scan Add Suffix .
Step 2. Determine the 2 digit hex value from the Symbology Chart (included in Appendix A) for
UPC.
Step 3 . Scan 6, 3 from the Programming Chart inside the back cover of this manual.
Step 4 . Determine the hex value from the ASCII Conversion Chart (Code Page 1252), page 157,
for the CR (carriage return).
Step 5 . Scan 0 , D from the Programming Chart inside the back cover of this manual.
Step 6. Scan Save , or scan Discard to exit without saving.
To Clear One or All Prefixes or Suffixes:
You can clear a single prefix or suffix, or clear all prefixes/suffixes for a symbology. When you
Clear One Prefix (Suffix), the specific character you select is deleted from the symbology you
want. When you Clear All Prefixes (Suffixes), all the prefixes or suffixes for a symbology are
deleted.
Step 1 . Scan the Clear One Prefix or Clear One Suffix symbol.
Step 2
. Determine the 2 digit Hex value from the Symbology Chart (included in Appendix A) for
the symbology from which you want to clear the prefix or suffix.
Step 3. Scan the 2 digit hex value from the Programming Chart inside the back cover of this
manual or scan 9 , 9 for all symbologies.
Your change is automatically saved.
To Add a Carriage Return Suffix to all Symbologies
Scan the following bar code if you wish to add a carriage return suffix to all symbologies at once.
This action first clears all current suffixes, then programs a carriage return suffix for all
symbologies.