- 12 -
Clear up the press mould per day. Set down the press head and press coat and
i
clean them with carefully. Before next installation, use lubricants to keep them can
move smoothly.
About PLC
There are four buttons and one touch screen on this machine. Start button is used for starting the
program, stop button is used for stopping the program. After pressing the stop button, the motor
will stop and all valves will reset.
The operation of Touch screen is as followed:
Display the homepage as followed when starting.
Type identify:
It is used to show type 400KN or 600KN. If fault, all sets of program are fault.
Status display : It is used to confirm if set of press tool is fault and if limit switch is good.
Display actual pressure
Display real-time of holding time
Display
holding
pressure of setting
Display holding
time of setting
Display the step
of pressing
Type identify
Status
Parameter setting
