C-Nav C-NaviGator III, Руководство пользователя

Страница: 68 / 121

C-NaviGator III User Manual
Revision 2 Page 68 of 121 9/27/2013
FIG 1: Unscrew (from top) or make sure that the screw terminals (square area)
are fully open, so you can secure the inserted cables correctly to the loose
housing connector (it may already be plugged into the unit as per factory
installation).
FIG 2: Insert cables* (from front) and screw / secure the cables by turning the
screw on top of the housing to secure the cables properly. Check that the cables
are firmly in place and do not appear loose or fall out when pulling gently.
FIG 3: Plug the housing into the appropriate connector area of the unit and check
again that the cables secured conform to the markings on the connector area of
the unit. Finalize the installation by fastening the screws located in front on each
side of the housing connector
(FIG 4).
*Note :
Required polarization verification (for instance -/+ for DC power input) should
conform to the markings on the connector area of the unit. Ignoring the
markings on the unit or its add-on modules might damage the unit and / or
external equipment in which end, warranty will be void.