C.E.C. TLO 3.0, Руководство пользователя

Страница: 15 / 24

TL0 3.0 User's Manual
15
Stop Playback
Press the STOPbutton to stop playback.
NOTE : After pressing the STOPbutton it will take a few seconds for the CD-
Turntable to stop spinning . Do not touch the CD Stabilizer or the disc until those
stop completely. Pressing the CD Stabilizer down exessively may damage the CD
mechanism or cause this appliance to malfunction.
Remove the Disc
After the CD Stabilizer stops remove the CD Stabilizer first by holding its top edge, then
the disc. Place the CD Stabilizer on the CD-Turntable even without disc.
▷ Do not leave a disc on the CD-Turntable when the TL0 3.0 is not in use.
▷
The CD Stabilizer which works also for a dust cover should be kept on the
CD-Turntable when unused.
SUPERLINK is CEC’s proprietary digital signal transmission system that transports music
signals and synchronization(clock) signals with separate cables. The SPDIF(Sony Philips
Digital Inter Face) and AES/EBU(Audio Engineering Society/European Broadcasting Union)
systems, commonly used in coaxial digital outputs and optical outputs, transmit both the
music and clock signals through the same cable, and thus are prone to jitter effects caused
by the signals interfering with each other. CEC’s SUPERLINK system transmits these signals
separately with multiple cables, requiring no encoding/decoding process for data transmission.
It minimizes deterioration of the music signal during transmission by using the clock signals
from the D/A converter’s master clock generator to achieve complete synchronization. Each
transmission path delivers/receives the following signals.
MCK (Master Clock): The CD transport receives the master clock signal from the D/
A converter through this line, and functions as a slave to the DA converter, enabling
completely synchronized transportation of audio data.
BCK (Bit Clock): Sends bitclock signals, required for digital data bit identification(e.g.
sampling frequency) or signal readout, from the CD transport to the D/A converter.
LRCK
(L/R Clock): Sends left/right identification clock signals from the CD transport to the
D/A converter.
DATA : Sends audio data from the CD transport to the DA converter.
"SUPERLINK" Digital Signal Transmission