C.E.C. TLO 3.0 Скачать руководство пользователя страница 6

CD TRANSPORT TL0 3.0

6

Installation

 

Use of an audio rack is recommended to maximize the sound quality and performance 
of this appliance. Installation and use of this appliance in the locations described below 
may cause deterioration in sound quality or malfunction: 

  Locations  exposed  to  direct  sunlight,  such  as  windowsills,  and  other 

exceptionally warm locations, such as near heating appliances (surrounding 
temperature higher than 35 °C), or exceptionally cold locations (surrounding 
temperature lower than 10 °C), may prevent this appliance from functioning 
adequately. 

Damp locations exceeding 90% humidity may cause this appliance’s metal 
parts to rust, causing this appliance to malfunction. 

Dusty locations may cause this appliance to malfunction. The accumulation of 
dust inside the CD tray may lower the performance of music signal reading. It 
may also cause contact failure of the switches, and/or noise. 

  Otherwise, avoid installing this appliance close to other transformers and 

electrical motors, so as to prevent the pickup of induction hum. Also, avoid 
mounting this appliance on surfaces that may be affected by vibration. 

Avoid lightning strikes

Disconnect the AC power cord from the AC outlet when there is a thunderstorm in your 
vicinity.

Condensation

When this appliance is brought into a warm room when the exterior temperature is cold, 
or when the room temperature rises sharply from using a heater, condensation may 
form both inside and outside this appliance, hampering its performance. If this happens, 
leave this appliance unused in the room for 1 to  hours (depending on the amount 
of condensation), so as to bring the temperature of this appliance closer to the room 
temperature. The condensation should go away gradually. 

Listening etiquette

Make sure your playback sound, ex. due to too big sound, does not disturb other people 
and your neighborhood.

Содержание TLO 3.0

























Отзывы: