DIGITAL TO ANALOG CONVERTER DA 0 3.0
DA 0 3.0 User's Manual
6
7
Back Panel Functions
IEC Power Connector, Main Switch, Fuses and Input Voltage Selector
There are fuses located in the IEC power connector on the back panel. For 230
volts operation a 0.63 amperes “Slow Blow” fuse is used. For 115 volts operation
the fuse should be 1.25 amperes. If power does not come on, contact your
authorized service representative.
Inputs
▷
2 x COAX jacks, labeled 1 and 2, accommodate signal from digital sources,
good for short runs and lower frequencies
▷
2 x TOSLINK inputs, labeled OPT 1 and OPT 2, provide ground isolation
between the units and noise immunity over long runs
▷
2 x AES/EBU inputs, labeled AES 1 and AES 2 to accommodate high quality
signal, that uses professional protocol
▷
1 x USB input (optional), Currently a USB – input is available to accommodate
digital signal from a computer source
Outputs
▷
Two sets of analog output jacks are provided – a pair single-ended RCA
outputs and a pair of balanced XLR outputs.
The switch between them activates the output selected.
Front Panel Functions
“ON/OFF” Button
Switches the unit “ON” and “OFF”. See OPERATION SECTION for details
“MUTE” Button
This button toggles between mute and normal volume modes. When the indicator
above the mute button is green the system is muted
“MENU” Button
Switches between menu and normal operation
“ENTER” Button
Validates the option selected
“MENU” Knob
Scrolls through the menu
LED Display
Shows the input selected, the signal sample/bit rate and the menu options. This display
is auto dimmable – goes off in few seconds if no control is operated. It automatically
goes on at power up, in case the input signal changes or user menu is selected
COAX Inputs
TOSLINK Inputs
AES/EBU Inputs
RCA Outputs
SWITCH RCA/XLR
XLR Outputs
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
NO USER SERVICEABLE PARTS INSIDE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ANALOG OUT
DIGITAL INPUT
DIGITAL TO ANALOG
CONVERTER
Model: CEC DA 0 3.0
CEC International GmbH
Handmade in EU
SERIAL NO.: DA 16040026
USB
LAN
COAX1
COAX2
OPT1
OPT2
AES1
AES2
RIGHT
LEFT
RIGHT
LEFT
RCA/XLR
SUPER LINK
MCK
BCK
LRCK
DATA
USB (optional)
Input Voltage Selector
LAN
Master Clock Bit Clock L/R Clock DATA
POWER
MUTE
MENU
SELECT
“SELECT” Buttons
“POWER” Button
“MUTE” Button
“MENU” Button
“OK” Button
DIGITAL TO ANALOG CONVERTER DAO 3.0
