C-Dax XC3, Руководство по эксплуатации, Страница: 15 / 39

15
U
SING
AB G
UIDANCE
This feature is normally used during spreading or spraying operations with an XC3 compatible sprayer or
spreader connected but may be used for navigation when performing other activities.
1.
Press “Set A & B”
2. D
rive to your A point (the start of your straight line) and press “Set A”
3. Drive
to your B point (the end of your straight line) and press “Set B”. When a C-Dax implement is
connected the track spacing will be automatically set depending on what the implement is, and what
material is being applied. You can manually override the track spacing as shown in the image below, C-
Dax do not recommend overriding the track spacing.
4. All of your A/B lines are saved while the unit retains power, if you wish to cycle through your A/B lines
then press the green left/right arrows. When the unit is switched off, or if you choose to reset all of the
features, then A/B lines are lost.
Correction
indicator
Distance (m) offline