C-Dax Pressure Nozzle Boom Kit, Руководство пользователя

Страница: 12 / 16

MAINTENANCE
After ​ ​ Use
At the end of spraying, flush the system three times with fresh water. Finish with a final rinse using C-DAX
Neutralise ​ ​ rinsing ​ ​ solution.
Remove
​ ​ the ​ ​ strainer ​ ​ basket ​ ​ under ​ ​ the ​ ​ lid ​ ​ of ​ ​ the ​ ​ sprayer, ​ ​ rinse ​ ​ and ​ ​ refit.
Remove the main filter element, clean and replace, ensuring that the filter bowl ‘O’ ring is in place, and the bowl nut
is
​ ​
tight.
Clean
​ ​
the
​ ​
outside
​ ​
of
​ ​
the
​ ​
sprayer
​ ​
to
​ ​
remove
​ ​
any
​ ​
spray
​ ​
residue.
Remove
​ ​ and ​ ​ rinse ​ ​ the ​ ​ nozzle ​ ​ tip ​ ​ filters.
Routinely
Check ​ ​ the ​ ​ spray ​ ​ tip ​ ​ patterns ​ ​ for ​ ​ wear, ​ ​ replace ​ ​ if ​ ​ necessary.
Calibrate
​ ​ the ​ ​ boom ​ ​ (every ​ ​ 100Ha)
Lubricate
​ ​ any ​ ​ moving ​ ​ boom ​ ​ parts.
Check
​ ​ spray ​ ​ hoses ​ ​ for ​ ​ kinks ​ ​ or ​ ​ damage, ​ ​ replace ​ ​ if ​ ​ necessary.
Annually
Replace ​ ​ spray ​ ​ tips
Lubricate
​ ​
the
​ ​
break
​ ​
away
​ ​
joints
​ ​
with
​ ​
good
​ ​
quality
​ ​
grease.
Filters
Your
​ ​
Pressure
​ ​
nozzle
​ ​
boom
​ ​
sprayer
​ ​
is
​ ​
fitted
​ ​
with
​ ​
three
​ ​
stage
​ ​
filtration
​ ​
consisting
​ ​
of:
a) filter
​ ​
basket
​ ​
at
​ ​
the
​ ​
tank
​ ​
inlet,
b) suction
​ ​
filter
​ ​
between
​ ​
the
​ ​
tank
​ ​
and
​ ​
pump,
​ ​
and
c) nozzle ​ ​ tip ​ ​ filters.
Check ​ ​ all ​ ​ filters ​ ​ after ​ ​ the ​ ​ first ​ ​ four ​ ​ hours ​ ​ of ​ ​ use, ​ ​ then ​ ​ at ​ ​ the ​ ​ end ​ ​ of ​ ​ each ​ ​ spraying ​ ​ session, ​ ​ more ​ ​ regularly ​ ​ depending
on ​ ​ the ​ ​ water ​ ​ supply ​ ​ and ​ ​ chemicals ​ ​ used.
Y:\Manuals\Current\90024-3-PNozz.DOC ​ ​​ ​​ ​​ ​ 12