Super USB WiFi Antenna 3
Page 15
FCC Interference Statement and Safety
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in
a residential installation.
Operation is subject to the following two conditions:
1. This device may not cause harmful interface, and
2. This device must accept any interface received, in-
cluding interface that may cause undesired opera-
tion. This equipment generates, uses, and can radi-
ate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. How-
ever, there is no guarantee that interference will not
occur in a particular installation. If this equipment
does cause harmful interference to radio or televi-
sion reception, which can be determined by turning
the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
a. Reorient or relocate the receiving antenna.
b. Increase the separation between the equip-
ment and receiver.
c. Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
connected.
d. Consult the dealer or an experienced radio
technician for help.
Changes or modifications not expressly approved by the
manufacturer could void the userʼs authority to operate
the equipment.
CAUTION:
1.
To comply with FCC RF exposure compliance re-
quirements, a separation distance of 20 cm
(about 8 inches must be maintained between the
antenna of this device and all persons.
2. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
