PAMSPAN 3000 User Manual
-6-
Note:
Default is Rate7 and CPE.
2.2 Restore Factory Defaults/Reboot Button
Press the reset button to reset the PAMSPAN3000 to its factory-default settings (default
configuration file will be uploaded). If you forget your password or cannot access the
device, you will need to reset the device to the default settings. The procedure shows as
follows:
1. Power off the Modem.
2. Press the reset default button.
3. Power on the Modem, and watch the Front Panel of the Modem.
4. While the " CPE LED” LED" blinks very quickly, please release the button.
(If you press the button to long, recall won't work, this is to prevent from you hold the
button all the time)
5. Now the factory is recalled, then you have to save current config again to overwrite your
previous user configuration. (This is so-called "one-time recall")
2.3 Parts check
Check the following items in your package. Contact our sales representatives if any item is
missing or damaged.
1.
PAMSPAN3000
2.
Power adapter
3.
Ethernet cable
