PAMSPAN 3000 User Manual
-48-
Appendix A: Advanced DSL port attributes
Attribute
Value
Default
DSP Firmware Version
DSP code version number
N/A
DSP Version
DSL driver version number
N/A
Connected
Current connected state:
True – modem is connected to a remote modem
False – modem is not connected to a remote modem
False
Annex Type
Current Annex Type:
1. Annex_A
2. Annex_B
Annex_A
State Current
state of the device:
Idle – not connected or attempting to connect
HandShake – connecting/hunting for remote modem
Training – connecting/found a remote modem
Showtime – connected to remote modem
N/A
Mode
To be configured as CO or CPE
CPE
Bit Rate Mode
The transfer modes provided by the device: Fixed,
adaptive
adaptive
Fixed Bit Rate
Nx64(data) + 8xI (data) +8(EOC)
2312kbps = 36*64(data) +8*0(data) + 8 (EOC)
Even though Tx Eoc is set as False, EOC will occupy
8K.
2312kbps
Framer sync
Out_Of_Sync – Framer data unsync
In_Sync - Framer data sync
Framer Type
Framer is a device used to align/synchronize to an
embedded framing pattern in a serial bit stream. Once
synchronized and data fields are properly aligned,
overhead bits for alarms, performance monitoring,
embedded signaling, etc. may be extracted and
processed. Four Framer types are provided: Level2,
Level1A,Level1B.
Level2
Bit Rate
Transmit and Receive rate (bits per second) of the
device
0
Tx Eoc
False: close EOC transmitting and receiving function.
True : Open EOC function (invalid presently)
False
Eoc Type
Six types of Embedded Operations Channel are
selectable, including DIS, INV, STA, CFG, ATMS, and
CFGLB.
Vender ID
It shows the vender ID of the device
4Wire Enable
Enable – 4Wire mode
Disable – 2Wire mode
Disable
4WAuto Start
“True” - A 4-wire Connection will be established at
power up.
“False” - The modem will remain in Idle mode at power
up.
False
4WActivate Line
false – normal operation
true – reset DSP
false
