INETVU® MOBILE SYSTEM QUICK START – SOFTWARE INSTALLATION
C-COM Satellite Systems Inc.
Page 5
1.3 Pre-Configuration Check List
The following items should be completed/known prior to configuring the iNetVu® Mobile System.
Contact the Network Operation Center (NOC) if any of the following items are unknown or if you are
unfamiliar with them.
This Guide covers the installation and configuration for iNetVu Software Version 7.5.8+
Required information:
•
Target Satellite Longitude
•
Receive Polarization (Horizontal/Vertical)
•
DVB Transponder Data (Frequency, Symbol Rate, Code Rate) Note: Code Rate is required if a
DVB-S1 carrier is used. DVB-S2 ACM carrier does not require a specific Code Rate to be
configured. DVB-S2 ACM is for 7000B and newer controllers only. (Required for DVB search
method)
•
USB Connection between the PC and iNetVu® Controller
•
iNetVu® Software Application
•
First time user should use the iNetVu Wizard which is imbedded into the iNetVu software for
guidance in configuring your system.