INETVU® MOBILE SYSTEM QUICK START – SOFTWARE INSTALLATION
C-COM Satellite Systems Inc.
Page 15
7.
Complete the
Satellite Parameters, DVB Settings
and
Search Method.
Mouse over each
selection for a detailed description. Click Finish when complete.
Satellite Parameters:
Longitude:
Satellite you will be searching on
RX:
Receive Polarity (Vertical or Horizontal)
LNB Power:
Select when controller will be powering the LNB, otherwise disable
LNB LO:
LNB LO Freq. (GHz)
DVB Settings:
Transponder No:
Select a Transponder No. to save configuration to
DVB Type:
Carrier Type (DVB-S1 or DVB-S2 ACM)
Frequency:
L-Band Frequency (KHz)
Symbol Rate:
Symbol Rate (Ksps)
FEC:
Code Rate
Search Method:
DVB Search:
DVB will search directly on DVB-S1 or DVB-S2 carrier and lock on it. For user
wishing to use the DVB Search Method the DVB Settings are required for satellite
acquisition. Please ask your service provider or NOC for a valid DVB Carrier.
RF Search:
RF Search cannot be used in a standalone setup
Duplicate the settings for all satellites:
Selecting this will duplicate parameters across all Satellite No. 0 ~ 4
