EPS-300
4
B-2. Product Description
B-2-1. EPS-300 Power Supply Hardware Overview
Button
Description
1
ON/OFF
ON/OFF Power Supply
2
CONST
Select voltage or current to be constant
3
MODE
Select the volts, milliamps, or time to be displayed
4
Changes the displayed value of the selected parameter
5
RUN
Starts and Stops the output from the Power Supply
The front and rear panel buttons as shown above are used to set up and run the EPS-300 power
supply. The audible alarm design allows a beep sound for each and every button pressed on the
front membrane keypad. A long beep alarm allows user to identify the run is complete or if an
error occurs. It will continue every ten seconds until any button is pressed or the main power is
turned off.
EPS – 300 II
