MN2000000143
Page 16
3.
Please insert the CD driver bound with PCIe SATA II 300 + PATA
Raid Card into your CD-ROM Drive.
4.
At the Windows desktop, click
Start
, then
Run
.
5.
Type
D:\PCIe\JMB36X\Setup.exe
, click
OK
. (Change
D:\
to
match your CD-ROM drive letter)
6.
Follow the on-screen instructions to complete the installation.
7.
Restart Windows to complete the installation.
For Windows® Vista-x64
For A New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the
“
PCIe\JMB36X\Floppy64
” folder, found on the driver CD, onto a
blank floppy disk then follow the directions below.
1.
Setup the RAID Array prior to Windows installation.
2.
Follow Microsoft’s Windows installation procedure.
3.
At the Windows Setup screen, press
Load Driver
to install the
RAID driver.
4.
Insert the floppy disk, please select
JMicron JMB36X
Controller (A:\jraid_f.inf)
, then press
Next
. (Change
A:\
to
