MN2000000143
Page 11
4.
Please use arrow keys
↑ and ↓to
select the array you want to
rebuild, press
Enter
.
5.
Please use arrow keys
↑ and ↓to
select the destination disk,
press
Enter
.
6.
When rebuilding is finished, select
Save And Exit Setup
, press
Enter
. When asked
Save to disk &Exit (Y/N)?
, press
Y
to exit
the BIOS.
BIOS Configuration
The PCIe SATA II 300 + PATA Raid Card BIOS will appear every time
your system starts up. During this (POST) process, the BIOS will show
up and indicate the devices attached to it.
Driver Installation
For Windows® 2000, XP and Server 2003
For A New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the
“
PCIe\JMB36X\Floppy32
” folder, found on the driver CD, onto a
blank floppy disk then follow the directions below.
