MN2000000143
Page 15
installation. To make this floppy disk, copy the contents of
the
“
PCIe\JMB36X\Floppy32
” folder, found on the driver CD, onto a
blank floppy disk then follow the directions below.
1.
Setup the RAID Array prior to Windows installation.
2.
Follow Microsoft’s Windows installation procedure.
3.
At the Windows Setup screen, press
Load Driver
to install the
driver.
4.
Insert the floppy disk, please select
JMicron JMB36X
Controller (A:\jraid_f.inf)
, then press
Next
. (Change
A:\
to
match your floppy drive letter)
5.
Follow the on-screen instructions to complete the Windows
installation.
For An Existing Installation
1.
Setup the RAID Array prior to driver installation and boot up to
Windows.
2.
At the
Found New Hardware Wizard
window pop-up, please
click
Cancel
button to cancel the driver installation for the device
at this moment. The driver for this device will be installed in the
next step.
