BYD COMPANY LIMITED
Rev. 21.12 2018
Document
Installation Manual and User Manual for BYD
Project No.
\
Code
2M SOP0007540
Edition
13
Page
12 / 30
12
Remark: “A” denotes the distance from the clamp to the edge of the module,
while “B” denotes the possible clamping range.
Installation method:
FIG. 7 Schematic diagram of long side pressing block
We advise users to use an installation method as shown in the two
pictures above, as this method renders modules connection rather fast.
Installation method with clamping on the short side of the frame as
below:
FIG. 8 Schematic diagram of four clamps under pressure of
2400Pa
Installation method:
FIG. 9 Schematic diagram of short side pressing block
Notice:
If customer choose Installation method with clamping on
the short side of the frame, you should customize the length of
the electric cable for us.
3.2.3 Insertion system
For the modules to follow an insertion system as depicted below
can be used for installation. T
he insertion system must have enough
strength to fix modules, and can be made of materials such as stainless
steel and other appropriate metals for solid support of the PV modules.
