BYD HVM 11.0, Руководство по эксплуатации

Страница: 41 / 60

10 Extension Shenzhen BYD Electronic Co., LTD
40
HVS&HVM Operating Manual
10. Extension
The SOC of the existing system and the module to be added should be similar before the
module adding on the existing system.
Procedure:
1. Charge or discharge the existing system to an SOC of around 30%. Note: new modules
have an SOC of around 30%
2. Shut off the inverter.
3. Switch off the battery system.
4. Switch off the breaker between the inverter and the battery system if there is any.
5. Take the BCU off.
6. Add the new module on top of other battery modules.
7. Put BCU back on top of the new battery module.
8. Configure the battery system.
9. Start the inverter.
New Battery
SOC 30% ≈
Original Battery
SOC 30% ≈
Be Connect 2.0