Page 11
Discharge current control with temperature
Protect temp./Resume temp.(
℃
)
Normal current(A)
-20~50/(-15-50)
0.7~1C*N
Remarks:
1. N= B-Plus2.5 battery quantity
4 Technical terms explanation
No.
Terms
comment
1
Discharge
Battery output power for load
2
Charge
Battery power supply(such as DC charger)
3
Full charged
Battery had been full charged, SOC is 100%.
4
Idle
Battery is on status of neither charge nor discharge and has not been fully charged.
5
Shutdown mode
Power off
6
SOC
State of Charge
7
SW
Software
8
HW
Hardware
9
Battery voltage
The voltage between B+/B-
10
Pack voltage
The voltage between P+/P-
11
Cell voltage
Single cell voltage
12
Failure
Battery or BMS are broken, and unit needs replacement
13
Alarm
Battery will stop charging or discharging immediately
14
Protect
Battery stops charging or discharging (e.g. cell is overvoltage). Operation can resume at
a later stage.
15
Over discharged
Battery module or batteries overvoltage, need to be recharged timely
