BYD B-Box H10.2, Руководство по установке

Страница: 22 / 35

B-Box HV Installation Manual
22 / 35
8 System Boot
Note: Before activating the system, please check the following items:
1,Confirm the inverter is not connected reversely;
2.Ensure reliable connection of communication cable between battery and inverter.
3.If the matched inverter is CAN communication, Jumper Cap on JP1 position; If the matched inverter is 485 communication, is the Jumper Cap in JP2 position.
4.Before not configured batteries and inverters, banned batteries and inverter to electricity at the same time.
8.1 Switch on the Air Switch of Battery
8.2 Set the BCU
Ⅰ
. Log in
Enter correct IP address in the browser (IE, Google Chrome or Mozilla Firebox browsers are recommended), and then enter the account number and password to log
in (the login ID: installer; password: byd@12345).
Log in the WEB interface by selecting one of the following ways:
1. WIFI
First, connect the computer to the system’s WIFI (name: BYD+ product serial number without the first three numbers (for example: product serial number is
BYD100171708-00000, then WIFI name will be BYD171708-00000, password: 123456789); then enter the IP: 192.168.5.1 in the browser, and enter the account
number and password to log in.
2. LAN
Connect the battery system and the computer in the same LAN through router, get the system’s IP address on the router web page, then enter the system’s IP address
or its host name (e.g. BYD171708-00000) in the browser, and enter the account number and password to log in.
3. Direct connection with network cable
Directly connect the computer to the network interface of battery system with the network cable, set the computer’s IP address to put the computer and the system
on the same network segment, enter the IP: 192.168.6.1 in the browser, and enter the account number and password to log in.
The interface after successful login is shown as below: