BYD B-Box H10.2, Руководство по установке, Страница: 15 / 35

B-Box HV Installation Manual
15 / 35
Step 3: adjust the support of the base; drill 4 holes on the wall with M6 expansion bolt (the distance between ground and the bottom holes depends on different
module numbers, please refer to picture below; the distance between the bottom two holes and upper two holes is 80mm; the distance between the right two holes
and left two holes is 200mm; the distance between the right edge to the right two holes is 190mm; the distance between the left edge to the left two holes is 190mm.);
mount the fixing plate to the wall, and install the fixing arch onto the BCU module.
Tools: Cross screwdriver, impact drill, adjustable wrench
Fixing plate
Fixing plate
Fixing arch