11
Is the air circulation in and around the unit sufficient?
– It is critical that the proper airflow is attained by placing the unit with
a minimum 3 inches of distance from walls in both the rear and sides.
Are the ventilation panels covered?
– Uncover the panels.
Are the condenser grids clogged?
– Clean the grids with a vacuum cleaner
Is an excess layer of ice settled in the part for white wine?
– See instructions for defrosting of the unit.
Is the temperature set correctly for wine type?
– Refer to
Wine Temperature and Storage
section for more
information.
l Possible cause/troubleshooting
•
The wine dispenser is making unusual noise.
Is the wine dispenser positioned straight?
– If the unit is not level vibrations may occur when condenser pump is
activated.
Are the bottles positioned correctly and not touching each other?
– Normal vibrations can cause bottles to vibrate, thus creating the
sounds.
•
The Argon bottle empties quickly or doesn’t last long.
Is the pressure gauge connected to the Argon bottle correctly?
– If the pressure gauge is not fitted properly, gas may escape from
bottle. Tighten to prevent gas loss.
Is the gas pipe connected to the pressure gauge correctly?
– If the connection is not fitted properly, gas may escape from
system. Tighten to prevent gas loss.
•
The lights in the dispenser are not on/not working.
Has the lighting switch been turned on?
– Flip the switch.
Is the light is broken?
– Exchange the LED:
1. Unplug unit.
2. Remove the LED.
3. Exchange the LED.
4. Plug unit in and turn on.
•
The cooling engine in the unit turns on more frequently and it remains on
for an extended period/longer than normal.
Is the door fully closed?
