EN
36
3.6 System settings/visualisation
Note:
All of the programable settings described in
Part
3.8
can only be accessed and activated in the
“PAUSE”
mode.
Visualisation of the menu screens/displays:
Note:
The differing representation of the software
diagrams exclusively serves a better overview and is
subsequently described.
In each menu screen the blue light bar highlights the
current
active menu item
or
value set
.
AUTO RINSE
ACTIVE
SERVICE
INACTIVE
STOP DELAY
PERMANENTLY DEACTIVATED
SETUP
INACTIVE
EXIT
3.7 Main menu
The menu consists of 4 selectable menu items in which the
subsequent settings may be effected:
AUTO RINSE:
s¬-ODE¬FOR¬AUTOMATIC¬mUSHING
SERVICE:
s¬
Settings of setpoint- and limit values for service purpose.
SETUP:
s¬
General device settings (date, time, language, setpoint- and
limit values, operating mode).
The recommended target values of all settings
are documented in the form “Form for set values
of BWT bestaqua 6,12,18“ (see Part 7.1).
Document the parameters
after you have set all of
the data at the device.
Please use the template at the end of the operating
instructions.
3.7.1 Menu: SETUP
General settings:
Note:
The change in the programming menu is avai-
lable from both the main screen
“pause“
as well as
from the detail overview display
“PAUSE“
.
p
a
u
s
e
PERM
3.2
bar
PUMP
_
_
_
bar
PAUSE
03-
12
-
13
15
:
58
D
Confirm with the
[
] button
to shift into the
programming menu.
EXIT
SERVICE
STOP DELAY
AUTO RINSE
SETUP
Fig. 10:
Main selection menu: “SETUP“
The “SETUP“ selection menu appears:
D
The menu item
“DATE“
is active.
DATE /
TIME
Date
;
time
CONDUCTIVITY / TDS
PERMANENTLY DEACTIVATED
OPERATION MODE
Operation mode (online/offline)
LANGUAGE
Setting of the menu language
BACK
Quit menu and return to selection menu
Fig. 11:
Display of the activated “SETUP“ menu.
Perform the general settings of the
“SETUP“
selection menu in
accordance to:
Fig. 12, Fig. 13
.
