background image

GasAlertMicroClip 

Specifications

 

15

 

O

2

 measuring principle:

 Capillary controlled concentration 

sensor 

Alarm conditions:

 TWA alarm, STEL alarm, low alarm, high 

alarm, multi-gas alarm, over range (OL) alarm, low battery 
alarm, confidence beep, automatic shutdown alarm 

Audible alarm:

 95 dB+ at 30 cm (100 dB typical) variable 

pulsed beeper 

Visual alarm:

 Red light-emitting diodes (LED) 

Display:

 Alphanumeric liquid crystal display (LCD) 

Backlight:

 Activates when the pushbutton is pressed and 

deactivates after 5 seconds. Also activates during an alarm 
condition. 

Self-test:

 Initiated at activation 

Calibration:

 Automatic zero and automatic span 

Oxygen sensor:

 Automatic span on activation (selectable) 

User field options:

 Confidence beep, latching alarms, 

enable/disable safe display mode, oxygen measurement, 
combustible sensor measurement, sensor disable, set 
calibration interval, force calibration, calibration lock, force 
bump, bump interval, bump due lock, stealth mode, IR stealth 
mode, language selection, enable/disable automatic oxygen 
calibration, enable/disable auto zero at start-up, set alarm 
setpoints, set span concentration values, and set STEL 
calculation period. 

Battery operating time: 

1 rechargeable lithium polymer: 10-12 hours (typical) 

Year of manufacture:

 The detector’s year of manufacture is 

determined from the serial number. The second and third 
number after the first letter determines the year of manufacture. 
E.g., H304-Y000001 = 2004 year of manufacture 

Approved batteries: 

North America 

Approved batteries for product (standards EN50020, UL913, 
C22.2 No. 157) 

Rechargeable battery 

Temperature code 

Lithium polymer 

T4 

Battery charger:

 GasAlertMicroClip charging adapter 

First-time charge:

 2-3 hours 

Normal charge:

 2-3 hours 

Warranty:

 2 years including sensors 

Approvals:

 

Approved by CSA to both U.S. and Canadian Standards 
CAN/CSA C22.2 No. 157 and C22.2 152 
ANS/UL – 913 and ANSI/ISA – S12.13 Part 1 

CSA

   Class I, Division 1, Group A, B, C, and D 

ATEX

   CE 0539 

g

 II 1 G EEx ia IIC T4 

 KEMA 

06ATEX0056 

IECEx

  Ex ia IIC T4 

 

Содержание GasAlertMicroClip





















Отзывы: