Get the current automatic output frequency:
Send: AOUT+STATUS
Returns: Current Status: Frequency<current frequency Hz>
OK
WLAN+SET+"WLAN+NAME"
Network name is WLAN+NAME, no password
WF-WM410
WiFi Wireless High
Speed
High
Precision
Inclinometer
⑥
AOUT automatic output frequency setting and acquisition
The allowed frequency range is 0-1000 (Hz), but higher than 50Hz may cause unstable operation. Please try
to select a frequency within 0-50Hz. When the set automatic output frequency exceeds 1000, it is
automatically set to 0. When the set automatic output frequency is 0, the automatic output stops. When the
set frequency is not a common frequency, the actual frequency may be slightly different from the set
frequency, and the current frequency read shall prevail. The automatically output data content is the return
information of reading all the data in the hexadecimal command.
Set the automatic output frequency:
Send: AOUT+SET+Auto output frequency
Return: OK
Example: AOUT+SET+5
0
⑦
WLAN wireless information setup and acquisition
If the WLAN name or password a, \, ", please add "on both sides of the WLAN name or password,
and use \\ instead of \ and \" instead of ". If there is no password, you can write "" or not.
Set up Wi-Fi information:
Send: WLAN+SET+network name+network password
Return: OK
Example: WLAN+SET+W"12+\\AB\"x" The network name is WLANNAME and the password is 12
+\AB"x
Bewis Sensing Technology LLC
www.bwsensing.com
Tel:
+86 18906177922
