90 / 143
5. Give he camera a device number. This number will equal to the channel number of
the camera stand. Click
to select the device number.
For instance, If the camera is assigned to channel 1, its device number = 1.
The camera’s device number shall be 1 ~ 16.
■
PTZ scanner
Click this to add a new PTZ scanner. There are 8 directions of this device’s icons that
you can choose from the icon select table :
Upwards Downwards Leftwards Rightwards
Left up Left down Right up Right down.
Please follow the procedure described in Camera section to add a new PTZ scanner.
■
Speed dome
Click this to add a new speed dome. There are 2 directions of this device’s icons that
you can choose from the icon select table :
Upwards Downwards
Please follow the procedure described in Camera section to add a new speed dome.
■
Sensor
Click this to add a new sensor. Only one device’s icons is in the icon select table.
Sensor
Please follow the procedure described in Camera section to add a new sensor.
■
Output port
Click this to add a new sensor. Only one device’s icons is in the icon select table :
Output port
Please follow the procedure described in Camera section to add a new sensor.
■
Change background
If you want to change the background map, click this button to change it. The icon
select table will show all the available map which is put in the folder,
C:\Program Files\SCode\initial\bitmap. The available map’s icon is show as below :
*.bmp
Double click the map icon that you want change and the new map will be show on the
background.