BVL V-MIX DRIVE Maximus Plus 11-1S Скачать руководство пользователя страница 58

Страница: 58 / 92

Transport, setup, and initial commissioning

Translation of the Original Operating Manual

V-MIX Fix Plus

5.2

Loading and unloading the machine using lifting devices

WARNING

Risks of personal injury from crushing or impact may arise if the raised machine

falls down unintentionally!



Use only the identified attachment points when fastening lifting gear for loading and

unloading the machine by means of a lifting device.



Use suitable lifting gear capable of supporting the weight of the machine in a safe

manner.



Stay out from under the lifting zone below the raised machine at all times.

There are attachment points on the machine that are

labeled with the pictogram and can be used to attach

lifting gear.

Содержание V-MIX DRIVE Maximus Plus 11-1S





























































































Результаты поиска

Содержание V-MIX DRIVE Maximus Plus 11-1S

Отзывы:

Бренды по названию

Популярные бренды

BVL V-MIX DRIVE Maximus Plus 11-1S, Руководство по эксплуатации

Результаты поиска

Содержание V-MIX DRIVE Maximus Plus 11-1S

Отзывы:

Бренды по названию

Популярные бренды