Transport, setup, and initial commissioning
V-MIX Fix Plus
Translation of the Original Operating Manual
57
5
Transport, setup, and initial commissioning
This chapter provides information about how you transport, set up, and commission your machine.
Before putting the machine into operation, the operator is required to have read and
understood the operating manual.
The machine operator must always ensure the presence of all complete and fully
functional safety equipment before starting the machine.
When commissioning the machine, observe the additional information provided in the
following chapters:
o
"Responsibilities of the operator", on page 11,
o
"Qualification of the personnel", on page 12,
o
"General safety instructions", starting on page 16,
o
"Warnings and instructions", starting on page 20.
Observe these chapters for your own safety.
5.1
Scope of delivery as supplied
Included in the scope of delivery is a variant of the V-MIX Fix Plus mixer including drive shaft, gear motor
and hydraulic unit (optional).
(1) Stationary mixer V-MIX Fix Plus
(2) Hydraulic unit (optional)
(3) Gear motor
(4) Document box
o
Operating manual of the V-MIX Fix Plus
o
Declaration of Warranty
o
DVD for the weighing computer (optional)
o
DVD containing the documents provided by the
suppliers
(5) Drive shaft (not shown in the image)
Fig. 5-1
2
3
4
1
