5)
Using the channel up and down buttons, select
AIR/CHANNEL
. You will have 2 options, either CABLE or AIR. AIR
will give you limited analog channels where as CABLE will give you
all channels including digital. Select the proper option by pressing
the volume button on the wireless remote.
In most applications, choosing
CABLE
is the proper choice.
6)
Using the channel up and down buttons, now select
AUTO
TUNING
and press
OK.
The TV should start auto scanning
available channels. This process will take 5-12 Minutes to
complete. Once your channels have been scanned, the TV should
display an active channel.
7)
Now you can plug the controller into the screen. Plug the
coiled controller cable into the back of the screen. The controller
cable will have one end that is coiled and the other will be straight
(not coiled). The coiled end is designed to be attached to the TV.
The straight end is designed for use on the controller so you can
easily secure the cable on the back of the controller.
8)
Remove the base from the controller by using a flat head
screw driver. Please be careful not to lose the screw or the lock
washer that is embedded in the controller. If the washer is not
present, the base will not properly lock and therefore spin.
9)
Insert the cable connection into the controller. Please note
that we purposely made the connection so it’s snug so continue
to press until you here a click. Similar to a phone cord or internet
cable, this means your controller cable is secure.
10)
Now secure the cable in the provided grooves on the
back of the controller and re-attach the base using the screw
provided.
11)
Attach the controller to the equipment with the provided
straps and plug in a pair of headphones into the headphone jack. Your
screen controller and screen should be fully functioning.