© 2016
BVC EBS Distribution GmbH,
Schweinfurt
41
operation
manual
e
n
gl
ish
central vacuum cleaner
The digital display and the two buttons “POWER” and “MENU” are located at the front side.
The on/off switch is no longer available – as soon as the device is connected to the power
supply it will be in stand-by mode. Power consumption in stand-by mode is less than 1 Watt
and therefore suits all legal requirements.
POWER button:
Use the POWER button to switch your vacuum cleaner on and off, adjust suction capacity
or select menu options.
Hold button down to decrease suction capacity. Hold button down again to increase suction
capacity. Push the POWER button to switch off.
Note:
We recommend starting the vacuum cleaner by using the slide control at the grip of the suc-
tion hose (see page 49). Starting the vacuum cleaner directly at the device in case of no suc-
tion hose being attached will result in raising motor temperature: when the airflow is mis-
sing the engine will not be cooled.
In case of raising temperatures the motor power will be throttled until switch-off. After coo-
ling-down the device can be activated again.
MENU button:
By pushing the MENU button repeatedly you can select five different functions which pro-
vide information about the device status such as hours of operation or filling level of the fil-
ter bag. Further functions assist troubleshooting like detecting clogged pipes.
POWER button
MENU button
Operation of the electronic box