manualshive.com logo in svg

Buyers SnowDogg EXII Series, Руководство пользователя

Поделиться
Скачать
Buyers SnowDogg EXII Series Скачать руководство пользователя страница 8

8

DISMOUNTED PLOW

MOUNTED PLOW

10.5 - 11.0

PIN HEIGHT

PROP STAND

ADJUSTABLE

FOOT

CHAIN LIFT

PROP

STAND

ADJUSTABLE

FOOT

Mounting

1.

 Check that the pins are fully retracted. The foot pedal should 

be pushed towards the truck and will lock in the retracted 
position.

2.

 Drive in to the plow so that the cross bar on the mount 

engages with the receiver notch on the plow. 

3.

 Pull the foot pedal away from the truck to release the pins.

4.

 Push up on the lift frame to engage the pins. The gold pin 

will be visible to verify full connection. Insert the lock pin (or 
padlock) through the foot pedal and pedal linkage.

5. 

Push the prop foot down and rotate up to the stowed 

position.

6.

 Connect both the lighting & hydraulic connectors.

Dismounting

1.

 Put the plow in float by holding the down button for 1 second.

2.

 Press down on the chain lift to retract the lift cylinder. The 

chain must have slack for ease of plow removal.

3.

 Pull the prop stand up and rotate the prop down to the 

deployed position.  Adjust the foot extension as necessary to 
support the plow at the truck height.

4.

 Push on the foot pedal and raise the lift frame 

simultaneously. The pins will retract and the lift frame will 
rotate forward to rest on the lift frame prop.

5. 

Disconnect the lighting and hydraulic connectors

6. 

Back away from the snowplow.

Find installation and mounting videos at www.SnowDogg.com

Содержание SnowDogg EXII Series





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды