Buyers SnowDogg EXII Series Скачать руководство пользователя страница 6

Страница: 6 / 28

WARNINGS

WARNING

Read this manual carefully before operating this snowplow.

WARNING

Make sure plow is properly attached and secured before

moving vehicle.

WARNING

Do not move plow while servicing or place any part of your

body between or under plow parts while moving plow.

WARNING

When transporting, position plow so as not to block driver

line of sight or plow headlights.

WARNING

DO NOT move the blade or exceed 50 MPH when trans-

porting the plow.

WARNING

DO NOT plow at speeds in over of 14 mph.

WARNING

Always lower blade and power off controller when vehi-

cle is not in use.

WARNING

Always follow the vehicle manufacturers recommendations

relating to snowplow installation.

WARNING

When using on a vehicle with air bags, DO NOT tamper

with, disable or remove any components related to the

operation of the air bags.

WARNING

When using on a vehicle with air bags, DO NOT tamper

with, disable or remove any components related to

the operation of the air bags. Vehicles equipped with

air bags are designed such that the air bags will be

activated in a frontal collision equivalent to hitting a

solid barrier (such as a wall) at approximately 14 mph

or more, or, roughly speaking, a frontal perpendicular

collision with a parked car or truck of similar size at

approximately 28 mph or more. Careless or high speed

driving while plowing snow, which results in vehicle

decelerations equivalent to or greater than the air bag

deployment threshold described above, could deploy

the air bag.

Содержание SnowDogg EXII Series





























Результаты поиска

Содержание SnowDogg EXII Series

Отзывы:

Бренды по названию

Популярные бренды

Buyers SnowDogg EXII Series, Руководство пользователя

Результаты поиска

Содержание SnowDogg EXII Series

Отзывы:

Бренды по названию

Популярные бренды