manualshive.com logo in svg

Buyers SnowDogg EXII Series, Руководство пользователя

Поделиться
Скачать
Buyers SnowDogg EXII Series Скачать руководство пользователя страница 24

24

V BLADE CONTROLLER DIAGNOSTICS

Diagnostic Mode

If this controller detects an issue with the snowplows wiring 
system, the indicator light will blink Red 3 times repeatedly. 
To determine the issue, go to the Diagnostic Mode. To enter 
Diagnostic Mode (turn vehicle’s ignition ON):

1.

 Turn the control OFF.

2.

 Press & Hold the UP button, then Press & Release the 

ON/OFF button. Then, release the Up button.

3.

 You are now in Diagnostic Mode (Channel 1) & all outputs 

are OFF (the plow will only function during the “short” test).

Blue Indicator Light

• A long blink indicates a starting point for the selected 
channel. 

Green Indicator Light

• Blinks the number of the selected channel.

Red Indicator Light

• Blinks 4 times to indicate the selected channel is open 
(broken).
• Solid (in “short” test) indicates the selected channel is 
shorted.

Short test

When you are in any channel, you can test to see if that 
channel is shorted by pressing and holding the UP button 
(Warning: The plow can move). If, while holding the UP 
button, the indicator light shows solid Red, that channel has 
a short.

Diagnostic Mode Button Configuration

RIGHT = Increase channel #
LEFT = Decrease channel #
UP = Turns ON selected channel (short test) 
ON/OFF = Exit Diagnostic Mode

Содержание SnowDogg EXII Series





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды