Buyers Snowdogg EX75II, Руководство по установке

Страница: 6 / 16

6 3036332_A
Prop Foot Deployment
For shipping the prop feet are in the transport position and the lift frame/Aframe are in stacking position. For
mounting, the prop feet will need to be rotated to the deployed position so that the plow can be mounted.
This step requires two people or a winch to rotate the lift frame.
1. Raise the rear of the a-frame approximately 6"-8" from the floor.
2. Rotate the lift frame away from the a-frame until the top plate is approximately parallel to the ground
3. Pull up on both prop feet and rotate down to the deployed position.
4. Extend both feet to contact the ground.
5. Allow the lift frame to rotate back down until it rests on the top surface of both prop feet.
Upper Lift Frame Assembly
8.0
6.0
AS SHIPPED WITH MOLDBOARD ASSEMBLED
PROP FOOT IN TRANSPORT POSITION
AS SHIPPED WITH MOLDBOARD ASSEMBLED
PROP FOOT DEPLOYED
5
DETAIL A
4d
4b
4c
4d
4b
4c
3a
1
2
5
SEE DETAIL A
3b