Usage of product
Usage of product
Initial use
1. Remove all the packaging, labels and accessories inside and outside the Health-care
Beverage Maker. It is recommended to do a boiling point test (see P17) before the initial
use of the product.
2. Boiled water for the first 2 to 3 times should be drained for cleaning, and then wipe the
external parts with a wet cloth.
Quick installation
1. Adjust the length of the power cord
through the winding device of the
base.
2. Put the ketttle on the base.
How to Use
I. Open the kettle lid
- Grasp the handle of the kettle lid and pull it up to
open the cover.
II. Add proper amount of pure water
-Don't add water when the pot is on the base.
III. Add the ingredients
-Never add water and ingredients over the
maximum or below the minimum water level.
-It may splash water if overfilling when boiling.
-Please be noted that it is recommended to add
water to 1200ml for tremella, astragalus, black
tea and other easily foamed ingresients, and open
the lid when working.
IV. Close the lid
-Place the lid on the kettle as shown. Press lightly
to close the lid and gently lift it with your hands. If
it cannot be lifted up, it means the lid is tight.
-If the lid assembly is not in place, it will fall easily
when pouring water.
