Product Introduction Product Introduction
A unique design of "lid in lid" with two nested lids is adopted for the Health-care
Beverage Maker according to the user's daily using preference. The user can observe the
cooking at any time through unscrewing the cover during normal running of the tea
basket, so as to choose to feed in ingredients or add flavoring and perform other
operations. If a lot of foam is produced during functioning, it is recommended that the tea
basket be opened to prevent spillage.
1. Installation of the filtering tea basket:
①
Grab the handle of the tea basket and put it into
the hollow part of the pot cover;
②
Tighten the tea basket cover clockwise, and it had
tightened when a slight sound of "tick" is heard.
Introduction of the filtering tea basket
The design of
‘
lid in lid
’
2. Disassembly of the filtering tea basket:
①
Unscrew the tea basket cover counter
clockwise;
②
Grab the tea basket handle and bring it out.
Introduction of the glass stew pot
Design of the stew pot
In addition, a unique design of scaffolding stew pot is added to the Health-care
Beverage Maker to meet the more comprehensive daily using requirements of users. Users
can stew foods separately with water and directly observe the cooking state through the
glass.
Note:
Please do not pour water when using the stew pot bracket to avoid the scald
caused by the fall of stew pot and holder.
1. Installation of the glass stew pot:
①
Place the stew in the bracket;
②
Lift the bracket
together with the stew pot;
③
Install on the Health-care beverage maker and cover the
outer lid of the bracket;
④
The installation has been completed when the triangle mark on
the bracket is aligned with the one on the handle of the glass body.
2. Disassemble of the glass stew pot:
①
Lift the bracket and bring it out with the stew pot;
②
Lay down the bracket gently;
③
Take the outer lid off the bracket and remove the stew pot.
