WORKSHOP PRESSES
WORKSHOP PRESSES
09
10
The V-blocks must be used by pair,not by piece.
Only one authorized person having read carefully and understood the contents of this manual is
allowed to operate the press.
Only for pneumatic pump:working air pressure 9-12bar.
②
④
⑤
①
③
⑥
② ③
Operation Description
V-Blockers Operation
Close the release valve by turning it to the right until it is firmly closed.
Activate the pump until the piston approaches the piece.
Align the piece and the piston so that the piece is properly centered.
Activate the pump to apply pressure to the piece.
When the work is finished, stop the pump and open the release valve to remove the piece.
Saddle And Pin Sets Operation
①
②
Make Sure every parts are fixed and tightened.and the press should be placed on a firm, regular
and horizontal surface.
Leaving enough space around the press while it is in operation so that it is always easily accessi-
ble.
Ensure table at proper position and lock the table by the axles.
Use And Operation
Содержание BHP0020
Страница 11: ...WORKSHOP PRESSES 10 V Blockers Operation...
Страница 12: ...11 WORKSHOP PRESSES Moveable Cylinder Operation...
Страница 15: ......