2. INSTALLATION AND USE
EN
19
2.5
ADJUSTING THE WORKING PRESSURE
This compressor is equipped with an adjustment valve
for maximum working pressure: 8bar.
There is no adjustment or variation device for use
pressure.
2.6
CAUTIONS WHILE USING
Do not do any jobs on the compressor unless you have
disconnected the power plug.
Temperature in operating ambient: 0°C +35°C.
Do not aim jets of water or inflammable liquids on the
compressor.
Do not place inflammable objects near the compressor.
During stays, bring the start switch to position “0”
(OFF).
Never aim the air jet at people or animals .
Do not transport the compressor while the tank is
pressurised.
Keep children and animals well away from the machine
operating area.
If using the compressor for painting:
a) Do not work in closed environments or near to
naked flames
b) Make sure there is adequate exchange of air
c) Protect your nose and mouth with an appropriate
mask.
If the electrical cable or plug are damaged, do not use
the compressor and contact an authorised service
centre to replace the faulty element with an original
spare part.
Do not insert hands and/or any object inside
protection grilles.
When you have finished using the compressor, always
remove the lug from the power socket
17
18
16
CLICK
2
1
d
c
1
2
Step 2
Step 3 ON
STOP
STOP
230 V.
120 V.
Step 1
OFF
Step 1
OFF
Step 2
Step 4 ON
Step 3 RESET
