TOOLS
This tool set includes also the following components:
3 different slide hammer 1,6 Kg x 160 mm - 2,7 Kg x 460 mm - 5,1 Kg x 600 mm
Pulling claws with fork opening, 13.7 x 18 mm, 105 mm long - 12.7 x 19 mm, 130 mm long
Slotted 6-pt 1/2" sockets, 100 mm long, sizes 25 - 27 - 28 - 29 - 30 mm
Injector extractor in sleeve design with supporting shells, OD 35 mm, ID 29 mm
Spindle M17 x 1.0
Pulling adapter with external thread, M27 x 1.0 (3pcs) and M25 x 1.0
Pulling adapter with internal thread, M27 x 1.0 (3pcs)
Sliding hammer adapter for inner, outer and claw extractor
DESCRIPTION
Adapter
Inner Thread
NOTE
: The technique required for removal of the injector will depend on which system is fitted to the
vehicle. Always use an external adaptor first if possible. If by using reasonable force the injector cannot
be removed, use an internal adaptor. Before working on the fuel system, make sure that the fuel system is
NOT pressurised. Refer to the manufacturer's instruction manual on how to de-pressurise the system.
Disconnect the injector wires and connections as per the manufacturer's instructions. Remove any carbon
build up from around the injector. Remove the electrical unit from the injector.
Slotted Sockets
