OPERATION
Use of external adaptor
Use of internal adaptor
Remove the electrical unit. (see
A
)
Position the adapter with outside thread on top of
the injector (see
B)
Connect sliding hammer to the adapter with outside
thread. (see
C
)
The injector can be removed by using reasonable
force on the sliding hammer.
When an injector has been removed, it is
recommended that only a new or refurbished
injector is fitted.
Follow manufacturers fitting and safety instructions.
Remove the electrical unit
Insert and turn anti-clockwise a special hex
socket to remove the inner sleeve (see
D
).
Screw the appropriate internal adaptor (5) into
the threads of the injector and tighten with a
suitable spanner (see
E
).
Screw the slide hammer onto the adaptor.
The injector can now be removed using
reasonable force on the slide hammer (see
F
).
Be prepared for the sudden release of the
injector from the cylinder head.
When an injector has been removed, it is
recommended that only a new or refurbished
injector is fitted.
Follow manufacturers fitting and safety
instructions.
A
B
C
D
E
F
NOTE
:
To protect the threads all adaptors must be fixed tightened.
